Homepage > > Our Products > Roll formed Metal Sheets > RIBDECK 1000

RIBDECK 1000

(Trapezoidal sheet Ribdeck 1000)

Formed trapezoidal metal sheet Ribdeck 1000 of Kamaridis GlobalWire Group is manufactured from galvanized, aluzinc or prepainted steel in several colours.

This metal sheet is used in the production of the thermal insulating polyurethane panels (PUR/PIR).

RIBDECK 1000 cross section

Advantages

Easy Installation
Horizontal and vertical installation
Installation in low pitch roofs
High water draining capacity
Guaranteed water tightness
High corrosion resistance
High mechanical strength

Applications

Cladding and Roofing
Bare steel sheet for cladding and roofing.
Composite panels
Two steel sheets with interposed insulated material.
Curvature - Perforation
Ribdeck 1000 can be produced in curved form as well in perforated form; providing a great range of creative combinations to designer, engineers and architects.

Material Specifications

Technical Characteristics

Loading Table

Material Specifications

Materials

Technical Characteristics of Steel (EN 10327 / EN 10142 / EN 10143)

Quality	DX51D or S-220 or S-250 or S-280 or S-320
Width	1250mm
Thickness	0.40mm – 0.75mm
Zinc Coating (Z)	100-275 gr/m2
Tensile Strength	EN 10142

Technical Characteristics of Paint (SP)

Topcoat	15-20 mic.
Primer	5 mic.
Backcoat	5-7 mic.

Technical Characteristics

Technical Data

RIBDECK 1000
THICKNESS (mm base metal)	WEIGHT effective (kg/m2)	SECOND MOMENT (mm4)
0,40	4,00	8,21
0,45	4,50	10,22
0,50	5,00	12,30
0,60	6,00	16,00

Steel Sheet

Hardness from DX51-D to S-320 in standard thickness of 0,40 mm - 0,75 mm and length from 2,000mm to 12,000mm. On customer demand, it is also available in different thickness gauges and length.

Oxidation - corrosion protection

Aluzinc hot-dipped /Aluminium-alloy coated (43.5% Zn - 55% Al - 1.5% Si) with total coating mass from 70 gr/m² to 275 gr/m2 which provides 6 times higher protection in unfavourable weather conditions and corrosive environments than simple galvanisation with zinc.

Finish-coating Colorbond XRW

Multiple layers, pre-treatment, primer, finish coating of high strength in time guaranteed in unfavourable weather conditions.

On customer demand, it is also available with different organic coatings, depending on the use.

Colours

On customer demand, it is available in various final colours in RAL scale.

Basic Colours Ribdeck 1000: Red RAL ≈ 3016 White RAL ≈ 9002

Beige RAL ≈ 1015 Silver RAL ≈ 9006

On customer demand, it is also available in various final colours in RAL scale.

Strength calculations

All calculations were carried out at the "Research & Development Laboratories" of LYSAGHT® - BHP Building Product of Australia.

Loading Table

Loading Table RIBDECK 1000 in daN/m2
GRADE	METAL THICK-NESS	TYPE OF SPAN	FASTENERS PER SHEET	CATE- GORY	SPAN (m)
GRADE	METAL THICK-NESS	TYPE OF SPAN	FASTENERS PER SHEET	CATE- GORY	1,25	1,50	1,75	2,00	2,25	2,50	2,75	3,00	3,25	3,50
S 320	0,50 mm	SINGLE (S)	2	1	275	181	140	107	84	62	46	35
		SINGLE (S)		2						69	57	47
		INTERNAL(IS)		1	358	247	176	138	109	88	66	50	39	50
		INTERNAL(IS)		2							72	61	52	61
	0,60 mm	SINGLE (S)	2	1	385	268	196	150	113	82	62	47	37
		SINGLE (S)		2					119	96	79	67	57
		INTERNAL(IS)		1	481	334	246	188	149	120	99	79	70	62
		INTERNAL(IS)		2								83	77	76
	0,70 mm	SINGLE (S)	2	1	481	334	245	188	141	103	76	60	58	37
		SINGLE (S)		2					148	120	99	83	60	61
		INTERNAL(IS)		1	602	418	307	235	185	150	124	99	77	62
		INTERNAL(IS)		2								104	88	76
	1,00 mm	SINGLE (S)	2	1	642	446	327	251	189	137	103	79	63	50
		SINGLE (S)		2					198	160	132	110	95	82
		INTERNAL(IS)		1	803	559	410	314	248	200	167	132	104	83
		INTERNAL(IS)		2								139	119	102

Notes

Serviceability limit state has been based on (L/200)
Loads are uniformed distributed
Numbers are based on 10 gauge Hex Head fasteners, with a minimum head washer diameter of 11 mm, fixed to a minimum 1.00 mm material (S550GD)
1daN/m2 = 1,02kp/m2