SPANDECK 1000
(Trapezoidal sheet SPANDECK 1000 )
Trapezoidal steel sheets of Kamaridis GlobalWire Group are manufactured from galvanized, aluzinc or prepainted steel in several colours..
Spandeck 1000 Sectional Drawing
SIDE A: WIDE PAN
SIDE B: NARROW PAN
Note: Specify the external coloured side
Advantages
- Easy Installation
- Horizontal and vertical installation
- Installation in low pitch roofs
- High water draining capacity
- Guaranteed water tightness
- High corrosion resistance
- High mechanical strenght
Applications
- Cladding and Roofing
Bare steel sheet for cladding and roofing. Because of its high mechanical strength, it is ideal for long span covering. - Composite panels
Two steel sheets with interposed insulated material (polysterine panel - rockwool panel - mineral glass fibre etc). - Composite roofing slabs
In use with insulating materials. - Other applications
Building fascia, doors for industrial buildings, warehouses etc. - Curvature - Perforation
Spandeck 1000 can be produced in curved form as well in perforated form; providing a great range of creative combinations to designer, engineers and architects.
Material Specifications
Materials
Technical Characteristics of Steel (EN 10327 / EN 10142 / EN 10143)
|
Quality |
DX51D or S-220 or S-250 or S-280 or S-320 |
|
Width |
1250mm |
|
Thickness |
0.40mm – 1.00mm |
|
Zinc Coating (Z) |
100-275 gr/m2 |
|
Tensile Strength |
EN 10142 |
Technical Characteristics of Paint (SP)
|
Topcoat |
15-20 mic. |
|
Primer |
5 mic. |
|
Backcoat |
5-7 mic. |
Technical Characteristics
Technical Data
|
SPANDECK 1000 |
||
|
THICKNESS |
WEIGHT |
SECOND MOMENT |
|
0,50 |
5,00 |
21,56 |
|
0,60 |
6,00 |
27,61 |
|
0,75 |
7,55 |
33,20 |
|
1,00 |
10,00 |
44,83 |
Steel Sheet
Hardness from DX51-D to S-320 in standard thickness of 0,40 mm - 1,00 mm and length from 2,000mm to 12,000mm. On customer demand, it is also available in different thickness gauges and length.
Oxidation - corrosion protection
Aluzinc hot-dipped /Aluminium-alloy coated (43.5% Zn - 55% Al - 1.5% Si) with total coating mass from 70 gr/m² to 275 gr/m2 which provides 6 times higher protection in unfavourable weather conditions and corrosive environments than simple galvanisation with zinc.
Finish-coating Colorbond XRW
Multiple layers, pre-treatment, primer, finish coating of high strength in time guaranteed in unfavourable weather conditions.
On customer demand, it is also available with different organic coatings, depending on the use.
Colours
On customer demand, it is available in various final colours in RAL scale.
Basic Colours Spandeck 1000: Red RAL ≈ 3016 White RAL ≈ 9002
Beige RAL ≈ 1015 Silver RAL ≈ 9006
On customer demand, it is also available in various final colours in RAL scale.
Strength calculations
All calculations were carried out at the "Research & Development Laboratories" of LYSAGHT® - BHP Building Product of Australia.
Loading Table
| Load Tables SPANDECK 1000 in KN/m2 | |||||||||
| GRADE | BASE METAL THICKNESS |
TYPE OF SPAN |
FASTENERS PER SHEET PER SUPPORT |
LIMIT STATE | SPAN (m) | ||||
| 1,20 | 1,50 | 1,80 | 2,10 | 2,40 | |||||
| S 320 | 0,50 mm | SINGLE (S) | 2 | Serviceability | 3,04 | 2,68 | 1,95 | 1,28 | 1,00 |
| Strength | 6,06 | 4,85 | 3,88 | 3,10 | 2,48 | ||||
| END (ES) | Serviceability | 2,02 | 1,61 | 1,25 | 1,04 | 0,86 | |||
| Strength | 4,53 | 3,77 | 3,13 | 2,60 | 2,16 | ||||
| INTERNAL (IS) | Serviceability | 2,11 | 1,76 | 1,43 | 1,24 | 1,07 | |||
| Strength | 4,77 | 4,05 | 3,43 | 2,91 | 2,47 | ||||
| 0,60 mm | SINGLE (S) | 2 | Serviceability | 3,81 | 3,25 | 2,70 | 1,51 | 1,21 | |
| Strength | 7,75 | 6,20 | 4,96 | 3,97 | 3,17 | ||||
| END (ES) | Serviceability | 2,81 | 2,10 | 1,73 | 1,43 | 1,19 | |||
| Strength | 5,37 | 4,50 | 3,77 | 3,16 | 2,65 | ||||
| INTERNAL (IS) | Serviceability | 2,91 | 2,23 | 1,85 | 1,56 | 1,31 | |||
| Strength | 5,87 | 4,99 | 4,25 | 3,62 | 3,08 | ||||
| 0,75 mm | SINGLE (S) | 2 | Serviceability | 5,86 | 5,10 | 3,70 | 2,56 | 1,95 | |
| Strength | 9,59 | 7,67 | 6,13 | 4,90 | 3,92 | ||||
| END (ES) | Serviceability | 3,97 | 3,67 | 2,86 | 2,02 | 1,27 | |||
| Strength | 6,18 | 5,23 | 4,42 | 3,74 | 3,16 | ||||
| INTERNAL (IS) | Serviceability | 4,18 | 3,85 | 3,01 | 2,48 | 1,85 | |||
| Strength | 6,93 | 5,93 | 5,08 | 4,34 | 3,72 | ||||
| 1,00 mm | SINGLE (S) | 2 | Serviceability | 10,11 | 8,15 | 5,90 | 3,80 | 2,99 | |
| Strength | 12,00 | 11,25 | 10,21 | 8,16 | 6,53 | ||||
| END (ES) | Serviceability | 7,32 | 5,90 | 4,51 | 3,18 | 2,13 | |||
| Strength | 9,07 | 7,77 | 6,66 | 5,71 | 4,89 | ||||
| INTERNAL (IS) | Serviceability | 7,64 | 6,42 | 4,11 | 3,78 | 2,85 | |||
| Strength | 9,76 | 8,50 | 7,40 | 6,44 | 5,61 | ||||
Notes
Serviceability limit state has been based on (L/200)
Loads are uniformed distributed
Numbers are based on 10 gauge Hex Head fasteners, with a minimum head washer diameter of 11 mm, fixed to a minimum 1.00 mm material (S550GD)
1KN/m2 = 102kp/m2
